4G (Fourth-Generation)

4G is the short term for fourth-generation wireless, the stage of broadband mobile communications that will supercede the third generation (3G). While neither standards bodies nor carriers have concretely defined or agreed upon what exactly 4G will be, it is expected that end-to-end IP and high-quality streaming video will be among 4G's distinguishing features. Fourth generation networks are likely to use a combination of WiMAX and WiFi.

Technologies employed by 4G may include SDR (Software-defined radio) receivers, OFDMOFDMA (Orthogonal Frequency Division Multiple Access), MIMO (multiple input/multiple output) technologies, UMTS and TD-SCDMA. All of these delivery methods are typified by high rates of data transmission and packet-switched transmision protocols. 3G technologies, by contrast, are a mix of packet and circuit-switched networks. (Orthogonal Frequency Division Multiplexing),

When fully implemented, 4G is expected to enable pervasive computing, in which simultaneous connections to multiple high-speed networks provide seamless handoffs throughout a geographical area. Network operators may employ technologies such as cognitive radio and wireless mesh networks to ensure connectivity and efficiently distribute both network traffic and spectrum.

The high speeds offered by 4G will create new markets and opportunities for both traditional and startup telecommunications companies. 4G networks, when coupled with cellular phones equipped with higher quality digital cameras and even HD capabilities, will enable vlogs to go mobile, as has already occurred with text-based moblogs. New models for collaborative citizen journalism are likely to emerge as well in areas with 4G connectivity.

A Japanese company, NTT DoCoMo, is testing 4G communication at 100 Mbps for mobile users and up to 1 Gbps while stationary. NTT DoCoMo plans on releasing their first commercial network in 2010. Other telecommunications companies, however, are moving into the area even faster. In August of 2006, Sprint Nextel announced plans to develop and deploy a 4G broadband mobile network nationwide in the United States using WiMAX. The United Kingdom's chancellor of the exchequer announced a plan to auction 4G frequencies in fall of 2006.

4G technologies are sometimes referred to by the acronym "MAGIC," which stands for Mobile multimedia, Anytime/any-where, Global mobility support, Integrated wireless and Customized personal service.

Objectives

4G is being developed to accommodate the quality of service (QoS) and rate requirements set by forthcoming applications like wireless broadband access, Multimedia Messaging Service (MMS), video chat, mobile TV, HDTV content, Digital Video Broadcasting (DVB), minimal services like voice and data, and other streaming services for "anytime-anywhere". The 4G working group has defined the following as objectives of the 4G wireless communication standard

• A spectrally efficient system (in bits/s/Hz and bits/s/Hz/site),
• High network capacity: more simultaneous users per cell,
• A nominal data rate of 100 Mbit/s while the client physically moves at high speeds relative to the station, and 1 Gbit/s while client and station are in relatively fixed positions as defined by the ITU-R,
• A data rate of at least 100 Mbit/s between any two points in the world,
• Smooth handoff across heterogeneous networks,
• Seamless connectivity and global roaming across multiple networks,
• High quality of service for next generation multimedia support (real time audio, high speed data, HDTV video content, mobile TV, etc)
• Interoperability with existing wireless standards,and
• An all IP, packet switched network.

Principal technologies

• Baseband techniques
  • OFDM: To exploit the frequency selective channel property
  • MIMO: To attain ultra high spectral efficiency
  • Turbo principle: To minimize the required SNR at the reception side
• Adaptive radio interface
• Modulation, spatial processing including multi-antenna and multi-user MIMO
• Relaying, including fixed relay networks (FRNs), and the cooperative relaying concept, known as multi-mode protocol

4G features

According to the 4G working groups, the infrastructure and the terminals of 4G will have almost all the standards from 2G to 4G implemented. Although legacy systems are in place to adopt existing users, the infrastructure for 4G will be only packet-based (all-IP). Some proposals suggest having an open internet platform. Technologies considered to be early 4G include Flash-OFDM, the 802.16e mobile version of WiMax (also known as WiBro in South Korea), and HC-SDMA (see iBurst). 3GPP Long Term Evolution may reach the market 1–2 years after Mobile WiMax is released.

An even higher speed version of WiMax is the IEEE 802.16m specification. LTE Advanced will be the later evolution of the 3GPP LTE standard.

Access schemes

As the wireless standards evolved, the access techniques used also exhibited increase in efficiency, capacity and scalability. The first generation wireless standards used plain TDMA and FDMA. In the wireless channels, TDMA proved to be less efficient in handling the high data rate channels as it requires large guard periods to alleviate the multipath impact. Similarly, FDMA consumed more bandwidth for guard to avoid inter carrier interference. So in second generation systems, one set of standard used the combination of FDMA and TDMA and the other set introduced a new access scheme called CDMA. Usage of CDMA increased the system capacity and also placed a soft limit on it rather than the hard limit. Data rate is also increased as this access scheme is efficient enough to handle the multipath channel. This enabled the third generation systems to use CDMA as the access scheme IS-2000, UMTS, HSXPA, 1xEV-DO, TD-CDMA and TD-SCDMA. The only issue with CDMA is that it suffers from poor spectrum flexibility and scalability.

Recently, new access schemes like Orthogonal FDMA (OFDMA), Single Carrier FDMAInterleaved FDMA and Multi-carrier code division multiple access (MC-CDMA) are gaining more importance for the next generation systems. WiMax is using OFDMA in the downlink and in the uplink. For the next generation UMTS, OFDMA is being considered for the downlink. By contrast, IFDMA is being considered for the uplink since OFDMA contributes more to the PAPR related issues and results in nonlinear operation of amplifiers. IFDMA provides less power fluctuation and thus avoids amplifier issues. Similarly, MC-CDMA is in the proposal for the IEEE 802.20 standard. These access schemes offer the same efficiencies as older technologies like CDMA. Apart from this, scalability and higher data rates can be achieved. (SC-FDMA),

The other important advantage of the above mentioned access techniques is that they require less complexity for equalization at the receiver. This is an added advantage especially in the MIMO environments since the spatial multiplexing transmission of MIMO systems inherently requires high complexity equalization at the receiver.

In addition to improvements in these multiplexing systems, improved modulation techniques are being used. Whereas earlier standards largely used Phase-shift keying, more efficient systems such as 64QAM are being proposed for use with the 3GPP Long Term Evolution standards.

IPv6

Unlike 3G, which is based on two parallel infrastructures consisting of circuit switched and packet switched network nodes respectively, 4G will be based on packet switching only. This will require low-latency data transmission.

By the time that 4G is deployed, the process of IPv4 address exhaustion is expected to be in its final stages. Therefore, in the context of 4G, IPv6 support is essential in order to support a large number of wireless-enabled devices. By increasing the number of IP addresses, IPv6 removes the need for Network Address Translation (NAT), a method of sharing a limited number of addresses among a larger group of devices, although NAT will still be required to communicate with devices that are on existing IPv4 networks.

In the context of 4G, IPv6 also enables a number of applications with better multicast, security, and route optimization capabilities. With the available address space and number of addressing bits in IPv6, many innovative coding schemes can be developed for 4G devices and applications that could aid deployment of 4G networks and services.